|
|
Número de pieza | 74LV123 | |
Descripción | Dual retriggerable monostable multivibrator with reset | |
Fabricantes | Philips | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de 74LV123 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
No Preview Available ! INTEGRATED CIRCUITS
74LV123
Dual retriggerable monostable
multivibrator with reset
Product specification
Supersedes data of 1997 Feb 04
IC24 Data Handbook
1998 Apr 20
Philips
Semiconductors
1 page Philips Semiconductors
Dual retriggerable monostable multivibrator
with reset
Product specification
74LV123
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
CONDITIONS
MIN TYP MAX UNIT
VCC DC supply voltage
VI Input voltage
VO Output voltage
See Note1
1.0 3.3 5.5
0 – VCC
0 – VCC
V
V
V
Tamb
Operating ambient temperature range in free
air
See DC and AC
characteristics
–40
–40
+85
+125
°C
tr, tf
Input rise and fall times except for
Schmitt-trigger inputs
VCC = 1.0V to 2.0V
VCC = 2.0V to 2.7V
VCC = 2.7V to 3.6V
VCC = 3.6V to 5.5V
–
–
–
–
– 500
–
–
200
100
ns/V
– 50
NOTE:
1. The LV is guaranteed to function down to VCC = 1.0V (input levels GND or VCC); DC characteristics are guaranteed from VCC = 1.2V to VCC = 5.5V.
ABSOLUTE MAXIMUM RATINGS1, 2
In accordance with the Absolute Maximum Rating System (IEC 134).
Voltages are referenced to GND (ground = 0V).
SYMBOL
PARAMETER
CONDITIONS
VCC
"IIK
"IOK
"IO
DC supply voltage
DC input diode current
DC output diode current
DC output source or sink current
– standard outputs
VI < –0.5 or VI > VCC + 0.5V
VO < –0.5 or VO > VCC + 0.5V
–0.5V < VO < VCC + 0.5V
RATING
–0.5 to +7.0
20
50
25
UNIT
V
mA
mA
mA
"IGND,
"ICC
DC VCC or GND current for types with
– standard outputs
50 mA
Tstg Storage temperature range
–65 to +150
°C
PTOT
Power dissipation per package
– plastic DIL
– plastic mini-pack (SO)
– plastic shrink mini-pack (SSOP and TSSOP)
for temperature range: –40 to +125°C
above +70°C derate linearly with 12 mW/K
above +70°C derate linearly with 8 mW/K
above +60°C derate linearly with 5.5 mW/K
750
500
500
mW
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
1998 Apr 28
5
5 Page Philips Semiconductors
Dual retriggerable monostable multivibrator
with reset
TEST CIRCUIT
Vcc
PULSE
GENERATOR
Vl
RT
D.U.T.
VO
50pF
CL
RL= 1k
Test Circuit for Outputs
DEFINITIONS
RL = Load resistor
CL = Load capacitance includes jig and probe capacitiance
RT = Termination resistance should be equal to ZOUT of pulse generators.
TEST
tPLH/tPHL
VCC
< 2.7V
2.7–3.6V
≥ 4.5 V
VI
VCC
2.7V
VCC
SV00902
Figure 8. Load circuitry for switching times
Product specification
74LV123
1998 Apr 28
11
11 Page |
Páginas | Total 16 Páginas | |
PDF Descargar | [ Datasheet 74LV123.PDF ] |
Número de pieza | Descripción | Fabricantes |
74LV123 | Dual retriggerable monostable multivibrator with reset | Philips |
74LV125 | Quad buffer/line driver 3-State | Philips |
74LV126 | Quad buffer/line driver 3-State | Philips |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |