DataSheet39.com

What is GS81032AT?

This electronic component, produced by the manufacturer "GSI Technology", performs the same function as "32K x 32 / 1M Synchronous Burst SRAM".


GS81032AT Datasheet PDF - GSI Technology

Part Number GS81032AT
Description 32K x 32 / 1M Synchronous Burst SRAM
Manufacturers GSI Technology 
Logo GSI Technology Logo 


There is a preview and GS81032AT download ( pdf file ) link at the bottom of this page.





Total 23 Pages



Preview 1 page

No Preview Available ! GS81032AT datasheet, circuit

GS81032AT/Q-150/138/133/117/100/66
TQFP, QFP
Commercial Temp
Industrial Temp
32K x 32
1M Synchronous Burst SRAM
150 MHz–66 MHz
9 ns–18 ns
3.3 V VDD
3.3 V and 2.5 V I/O
Features
• FT pin for user-configurable flow through or pipeline
operation
• Single Cycle Deselect (SCD) operation
• 3.3 V +10%/–5% core power supply
• 2.5 V or 3.3 V I/O supply
• LBO pin for Linear or Interleaved Burst mode
• Internal input resistors on mode pins allow floating mode pins
• Default to Interleaved Pipeline mode
• Byte Write (BW) and/or Global Write (GW) operation
• Common data inputs and data outputs
• Clock Control, registered, address, data, and control
• Internal self-timed write cycle
• Automatic power-down for portable applications
• JEDEC-standard 100-lead TQFP or QFP package
-150 -138 -133 -117 -100 -66 Unit
Pipeline tCycle 6.6 7.25 7.5 8.5 10 12.5 ns
3-1-1-1 tKQ 3.8 4 4 4.5 5 6 ns
IDD 270 245 240 210 180 150 mA
Flow tCycle 10.5 15 15 15 15 20 ns
Through tKQ 9 9.7 10 11 12 18 ns
2-1-1-1 IDD 170 120 120 120 120 95 mA
Functional Description
Applications
The GS81032A is a 1,048,576-bit high performance
synchronous SRAM with a 2-bit burst address counter.
Although of a type originally developed for Level 2 Cache
applications supporting high performance CPUs, the device
now finds application in synchronous SRAM applications,
ranging from DSP main store to networking chip set support.
Controls
Flow Through/Pipeline Reads
The function of the Data Output register can be controlled by
the user via the FT mode pin (Pin 14). Holding the FT mode
pin low places the RAM in Flow Through mode, causing
output data to bypass the Data Output Register. Holding FT
high places the RAM in Pipeline mode, activating the rising-
edge-triggered Data Output Register.
SCD Pipelined Reads
The GS81032A is an SCD (Single Cycle Deselect) pipelined
synchronous SRAM. DCD (Dual Cycle Deselect) versions are
also available. SCD SRAMs pipeline deselect commands one
stage less than read commands. SCD RAMs begin turning off
their outputs immediately after the deselect command has been
captured in the input registers.
Byte Write and Global Write
Byte write operation is performed by using Byte Write enable
(BW) input combined with one or more individual byte write
signals (Bx). In addition, Global Write (GW) is available for
writing all bytes at one time, regardless of the byte write
control inputs.
Sleep Mode
Low power (Sleep mode) is attained through the assertion
(high) of the ZZ signal, or by stopping the clock (CK).
Memory data is retained during Sleep mode.
Core and Interface Voltages
The GS81032A operates on a 3.3 V power supply and all
inputs/outputs are 3.3 V- and 2.5 V-compatible. Separate
output power (VDDQ) pins are used to decouple output noise
from the internal circuit.
Addresses, data I/Os, chip enables (E1, E2, E3), address burst
control inputs (ADSP, ADSC, ADV), and write control inputs
(Bx, BW, GW) are synchronous and are controlled by a
positive-edge-triggered clock input (CK). Output enable (G)
and power down control (ZZ) are asynchronous inputs. Burst
cycles can be initiated with either ADSP or ADSC inputs. In
Burst mode, subsequent burst addresses are generated
internally and are controlled by ADV. The burst address
counter may be configured to count in either linear or
interleave order with the Linear Burst Order (LBO) input. The
burst function need not be used. New addresses can be loaded
on every cycle with no degradation of chip performance.
Rev: 1.01 7/2001
1/23 © 2000, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.

line_dark_gray
GS81032AT equivalent
GS81032AT/Q-150/138/133/117/100/66
Mode Pin Functions
Mode Name
Pin Name State
Function
Burst Order Control
LBO
L
H or NC
Linear Burst
Interleaved Burst
Output Register Control
FT
L
H or NC
Flow Through
Pipeline
Power Down Control
L or NC
ZZ H
Active
Standby, IDD = ISB
Note:
There are pull-up devices on LBO and FT pins and a pull down device on the ZZ pin, so those input pins can be unconnected and the chip will
operate in the default states as specified in the above tables.
Burst Counter Sequences
Linear Burst Sequence
Interleaved Burst Sequence
A[1:0] A[1:0] A[1:0] A[1:0]
A[1:0] A[1:0] A[1:0] A[1:0]
1st address
00 01 10 11
1st address
00 01 10 11
2nd address
01 10 11 00
2nd address
01 00 11 10
3rd address
10 11 00 01
3rd address
10 11 00 01
4th address
11 00 01 10
Note: The burst counter wraps to initial state on the 5th clock.
4th address
11 10 01 00
Note: The burst counter wraps to initial state on the 5th clock.
Byte Write Truth Table
Function
GW BW
BA
BB
BC
BD Notes
Read H H X X X X 1
Read H L H H H H 1
Write byte A
H
L
L
H
H
H 2, 3
Write byte B
H
L
H
L
H
H 2, 3
Write byte C
H
L
H
H
L
H 2, 3, 4
Write byte D
H
L
H
H
H
L 2, 3, 4
Write all bytes
H
L
L
L
L
L 2, 3, 4
Write all bytes
L
X
X
X
X
X
Notes:
1. All byte outputs are active in read cycles regardless of the state of Byte Write Enable inputs.
2. Byte Write Enable inputs BA, BB, BC and/or BD may be used in any combination with BW to write single or multiple bytes.
3. All byte I/O’s remain High-Z during all write operations regardless of the state of Byte Write Enable inputs.
Rev: 1.01 7/2001
5/23 © 2000, Giga Semiconductor, Inc.
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for GS81032AT electronic component.


Information Total 23 Pages
Link URL [ Copy URL to Clipboard ]
Download [ GS81032AT.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
GS81032ATThe function is 32K x 32 / 1M Synchronous Burst SRAM. GSI TechnologyGSI Technology

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

GS81     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search