DataSheet39.com

What is UPD6461?

This electronic component, produced by the manufacturer "NEC", performs the same function as "CMOS LSI CHIP FOR CAMCORDER ON-SCREEN CHARACTER DISPLAY 12 ROWS x 24 COLUMNS".


UPD6461 Datasheet PDF - NEC

Part Number UPD6461
Description CMOS LSI CHIP FOR CAMCORDER ON-SCREEN CHARACTER DISPLAY 12 ROWS x 24 COLUMNS
Manufacturers NEC 
Logo NEC Logo 


There is a preview and UPD6461 download ( pdf file ) link at the bottom of this page.





Total 60 Pages



Preview 1 page

No Preview Available ! UPD6461 datasheet, circuit

DATA SHEET
MOS INTEGRATED CIRCUIT
µPD6461, 6462
CMOS LSI CHIP FOR CAMCORDER ON-SCREEN CHARACTER DISPLAY
(12 ROWS × 24 COLUMNS)
The µPD6461, 6462 are CMOS LSI chips designed to provide on-screen character display for camcorders. When
combined with a microcontroller, the µPD6461, 6462 control the display of the characters displayed in the viewfinder (count,
time, date, etc.) and the recording of characters onto video tape (time, date, etc.).
Each character is created using 12 (width) × 18 (height) dots. Kanji characters and graphic symbols can also be displayed
by using two or more characters. The µPD6461, 6462 are compatible with color viewfinders and can output character signals
to three channels, the RGB channel for the color viewfinder and the VC1 and VC2 channels for the recording system and
monitor terminal.
The µPD6461, 6462 also have a power-on clear function and video RAM batch clear command, enabling the number
of operations assigned to the microcontroller to be reduced.
FEATURES
• Maximum number of characters: 12 rows × 24 columns (288 characters)
• Number of character patterns : 256 (µPD6461)/128 (µPD6462) (stored in ROM). Each pattern can be changed by
specifying a mask code option.
• Character size
: One dot per line or one dot per two lines (field)
• Number of character colors : 8
• Background
: No background, minimum background, or overall background can be selected for the
entire screen, together with rimming ON/OFF function. Any one of 8 different colors
is selectable as the background color and together with the rim color (black or white)
selectable per screen.
• Dot matrix
: Each character consists of 12 (width) × 18 (height) dots. There is no gap between
adjacent characters.
• Blinking
: Blinking can be turned on/off for each character. The blinking ratio is 1:1. The blinking
frequency can be selected from approx. 1 Hz, 2 Hz, and 0.5 Hz for the entire screen.
• Reversed characters
: Specified characters can be displayed in reverse video.
• Character signal output
: Character signals can be output to three channels. Output mode (1) (RGB + BLK, VC1
+ VBLK1, and VC2 + VBLK2) or output mode (2) (R + RBLK, B + BBLK, and G + GBLK) can
be selected by specifying a mask option. For output mode 1, three output formats are
available for the VC1 and VC2 channels (options A, B, and C).
• Clearing of video RAM
: Video RAM batch clear command and power-on clear function
• Interface with a microcontroller : 8-bit serial input supporting variable word length (LSB first or MSB first can be selected
by specifying a mask option.)
• Supply voltage
: Low-voltage operation possible (supply voltage range: 2.7 to 5.5 V)
The information in this document is subject to change without notice.
Document No. S13320EJ1V1DS00 (1st edition)
Date Published November 1998 N CP(K)
Printed in Japan
The mark shows major revised points.
© 1998

line_dark_gray
UPD6461 equivalent
BBLK
: Blanking B
BLK1, BLK2: Blanking Output 1, 2
CKOUT
: Clock Output
CLK : Clock Input
CS : Chip Select
DATA
: Data Input
GBLK
: Blanking G
GND
: Ground
Hsync
: Horizontal Synchronous Signal Input
N.C.
: No Connection
OSCIN
: Oscillator Input
OSCOUT : Oscillator Output
PCL : Power-on Clear
RBLK
: Blanking R
TEST
: Test
VB : Character Signal Output
VBLK
: Blanking Signal Output for VR, VG, VB
VC1, VC2 : Character Signal Output 1, 2
VDD : Power Supply
VG : Character Signal Output
VR : Character Signal Output
Vsync
: Vertical Synchronous Signal Input
µPD6461, 6462
5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for UPD6461 electronic component.


Information Total 60 Pages
Link URL [ Copy URL to Clipboard ]
Download [ UPD6461.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
UPD6461The function is CMOS LSI CHIP FOR CAMCORDER ON-SCREEN CHARACTER DISPLAY 12 ROWS x 24 COLUMNS. NECNEC
UPD6462The function is CMOS LSI CHIP FOR CAMCORDER ON-SCREEN CHARACTER DISPLAY 12 ROWS x 24 COLUMNS. NECNEC
UPD6464AThe function is ON-SCREEN CHARACTER DISPLAY CMOS LSI FOR 12-LINE/ 24-COLUMN DECK-TYPE VCR. NECNEC

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

UPD6     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search