UPC8105GR Datasheet PDF - NEC
Part Number | UPC8105GR | |
Description | Single Chip Transceiver Silicon MMIC for PHS | |
Manufacturers | NEC | |
Logo | ||
There is a preview and UPC8105GR download ( pdf file ) link at the bottom of this page. Total 16 Pages |
Preview 1 page No Preview Available ! DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
µPC8105GR
400 MHz QUADRATURE MODULATOR
FOR DIGITAL MOBILE COMMUNICATION
DESCRIPTION
The µPC8105GR is a sillicon monolithic integrated circuit designed as quadrature modulator for digital mobile
communication systems. This modulator housed in a 16 pin plastic SSOP that is easy to install and contributes to
miniaturizing the system.
The device has power save function and can operates 2.7 to 5.5 V supply voltage to realize low power
consumption.
FEATURES
• Internal 90° phase shifter is accurate over an IF range from 100 MHz to 400 MHz.
• Wide supply voltage range: VCC = 2.7 to 5.5 V.
• Low operation current: ICC = 16 mA (typ.).
• 16 pin plastic SSOP suitable for high density surface mounting.
• Low current in sleep mode
APPLICATION
• IF modulator for Digital cellular phone (PDC, IS-54, GSM etc..)
• IF modulator for Digital cordless phone (PHS, PCS etc..)
ORDERING INFORMATION
PART NUMBER
µPC8105GR-E1
PACKAGE
SUPPLYING FORM
16 pin plastic SSOP (225 mil) Carrier tape width 12 mm. Q’ty 2.5 kp/Reel
Pin 1 indicated pull-out direction of tape.
To order evaluation samples, please contact your local NEC sales office. (Part number for sample order:
µPC8105GR)
Caution electro-static sensitive device
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P10807EJ3V0DS00 (3rd edition)
Date Published October 1999 N CP(K)
Printed in Japan
The mark shows major revised points.
©
1995, 1999
|
|
µPC8105GR
PIN EXPLANATION
ASSIGN- SUPPLY PIN
PIN NO. MENT
VOL. (V) VOL.(V) FUNCTION AND APPLICATION
EQUIPMENT CIRCUIT
1 LOin −
0 LO input for phase shifter.
This input impedance is 50 Ω
matched internally.
1
50 Ω
2 LOin − 2.4 Bypass of LO input.
This pin is grounded through
internal capacitor.
Open in case of single ended.
3 GND 0
8
− Connect to the ground with
minimum inductance.
Track length should be kept as
short as possible.
4
I
VCC/2
− Input for I signal. This in put
impedance is larger than 20 kΩ.
Relations between amplitude and
VCC/2 bias of input signal are
following.
VCC/2 (v)
≥ 1.35
≥ 1.5
≥ 1.75
Amp. (mVp-p) *1
400
600
1000
4
5
I
VCC/2
− Input for I signal. This in put
impedance is larger than 20 kΩ.
VCC/2 biased DC signal should be
input.
6
Q
VCC/2
− Input for Q signal. This in put
impedance is larger than 20 kΩ.
VCC/2 biased DC signal should be
input.
7
Q
VCC/2
− Input for Q signal. This in put
impedance is larger than 20 kΩ.
Relations between amplitude and
7
VCC/2 bias of input signal are
following.
VCC/2 (v)
≥ 1.35
≥ 1.5
≥ 1.75
Amp. (mVp-p) *1
400
600
1000
12 MODout
−
1.5 Output from modulator.
This is emitter follower output.
12
2
5
6
*1: In case of that I/Q input signals are single ended.
Of course, I/Q signal inputs can be used either single endedly or differentially with proper terminations.
Data Sheet P10807EJ3V0DS00
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for UPC8105GR electronic component. |
Information | Total 16 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ UPC8105GR.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
UPC8105GR | The function is 400 MHz QUADRATURE MODULATOR FOR DIGITAL MOBILE COMMUNICATION. NEC | |
UPC8105GR | The function is 1 GHz DIRECT QUADRATURE MODULATOR FOR DIGITAL MOBILE COMMUNICATION. NEC | |
UPC8105GR | The function is UP-CONVERTER WITH AGC FUNCTION QUADRATURE MODULATOR IC FOR DIGITAL MOBILE COMMUNICATION SYSTEMS. NEC | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
UPC8
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |