|
|
Número de pieza | TGL34-8.2A | |
Descripción | Surface Mount unidirectional and bidirectional Transient Voltage Suppressor Diodes | |
Fabricantes | Diotec Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TGL34-8.2A (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
No Preview Available ! TGL 34-6.8 ... TGL 34-200CA
Surface Mount
unidirectional and bidirectional
Transient Voltage Suppressor Diodes
Unidirektionale und bidirektionale
Spannungs-Begrenzer-Dioden
für die Oberflächenmontage
Dimensions / Maße in mm
Pulse power dissipation – Impuls-Verlustleistung
Nominal breakdown voltage
Nominale Abbruch-Spannung
Plastic case MiniMELF
Kunststoffgehäuse MiniMELF
Weight approx. – Gewicht ca.
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped in ammo pack
Standard Lieferform gegurtet in Ammo-Pack
150 W
6.8...200 V
SOD-80
DO-213AA
0.04 g
see page 18
siehe Seite 18
Marking:
One blue ring denotes “cathode” and “TVS-Diode family”
The type numbers are noted only on the lable on the reel
Kennzeichnung: Ein blauer Ring kennzeichnet “Kathode” und “TVS-Dioden-Familie”
Die Typenbezeichnungen sind nur auf dem Rollenaufkleber vermerkt
Maximum ratings and Characteristics
Grenz- und Kennwerte
Peak pulse power dissipation (10/1000 :s waveform)
Impuls-Verlustleistung (Strom-Impuls 10/1000 :s)
Steady state power dissipation
Verlustleistung im Dauerbetrieb
TA = 25/C
TA = 25/C
PPPM
150 W 1)
PM(AV) 500 mW 2)
Peak forward surge current, 60 Hz half sine-wave
Stoßstrom für eine 60 Hz Sinus-Halbwelle
TA = 25/C
IFSM
20 A 3)
Max. instantaneous forward voltage
Augenblickswert der Durchlaßspannung
IF = 10A
VF < 3.5 V 3)
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
Tj – 50…+150/C
TS – 50…+150/C
RthA < 150 K/W 2)
Thermal resistance junction to terminal
Wärmewiderstand Sperrschicht – Kontaktfläche
RthT < 60 K/W
1) Non-repetitive current pulse see curve IPPM = f (tr)
Höchstzulässiger Spitzenwert eines einmaligen Strom-Impulses, siehe Kurve IPPM = f (tr)
2) Mounted on P.C. board with 25 mm2 copper pads at each terminal
Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lötpad) an jedem Anschluß
3) Unidirectional diodes only – nur für unidirektionale Dioden
07.01.2003
1
1 page |
Páginas | Total 4 Páginas | |
PDF Descargar | [ Datasheet TGL34-8.2A.PDF ] |
Número de pieza | Descripción | Fabricantes |
TGL34-8.2 | Surface Mount unidirectional and bidirectional Transient Voltage Suppressor Diodes | Diotec Semiconductor |
TGL34-8.2A | Surface Mount unidirectional and bidirectional Transient Voltage Suppressor Diodes | Diotec Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |