DataSheet39.com

What is US5881?

This electronic component, produced by the manufacturer "ETC", performs the same function as "CMOS Multi-Purpose Switch".


US5881 Datasheet PDF - ETC

Part Number US5881
Description CMOS Multi-Purpose Switch
Manufacturers ETC 
Logo ETC Logo 


There is a preview and US5881 download ( pdf file ) link at the bottom of this page.





Total 6 Pages



Preview 1 page

No Preview Available ! US5881 datasheet, circuit

US5881
CMOS Multi-Purpose Switch
Features and Benefits
Chopper stabilized amplifier stage
New miniature package / thin, high reliability package
Operation down to 3.5V
CMOS for optimum stability, quality and cost
Applications
Solid state switch
Limit switch
Current limit
Interrupter
Current sensing
Ordering Information
Part No.
US5881
US5881
Temperature Suffix
E
L
Package
SO or UA
SO or UA
Temperature Range
-40oC to 85oC Extended
-40oC to 150oC Automotive
*Contact factory or sales representative for legacy temperature options
Functional Diagram
VDD
Voltage
Regulator
Chopper
Output
UA Package
Pin 1 - V D D
Pin 2 - GND
Pin 3 - Output
GND
SO Package
Pin 1 - VD D
Pin 2 - Output
Pin 3 - GND
Description
The US5881 is a unipolar Hall effect sensor IC fab-
ricated from mixed signal CMOS technology. It in-
corporates advanced chopper stabilization tech-
niques to provide accurate and stable magnetic
switch points. There are many applications for this
sensor in addition to those listed above. The de-
sign, specifications and performance have been
optimized for applications of solid state switches.
The output transistor will be switched on (BOP) in
the presence of a sufficiently strong South pole
magnetic field facing the marked side of the pack-
age. Similarly, the output will be switched off (BRP)
in the presence of a weaker South field and remain
off with “0” field. The SOT-23 device is reversed
from the UA package. The SOT-23 output transis-
tor will be switched on (BOP) in the presence of a
sufficiently strong North pole magnetic field sub-
jected to the marked face.
Note: This is a static-sensitive device; please observe ESD precau -
tions. Reverse VDD protection is not included. For reverse voltage
protection, a 100resistor in series with VDD is recommended.
US5881 CMOS Multi-Purpose Switch
3901005881 Rev 5.0
24/July/01
Page 1

line_dark_gray
US5881 equivalent
US5881
CMOS Multi-Purpose Switch
Unique Features
CMOS Hall IC Technology
The chopper stabilized amplifier uses switched ca-
pacitor techniques to eliminate the amplifier offset
voltage, which, in bipolar devices, is a major source
of temperature sensitive drift. CMOS makes this ad-
vanced technique possible.
The CMOS chip is also much smaller than a bipolar
chip, allowing very sophisticated circuitry to be
placed in less space. The small chip size also contrib-
utes to lower physical stress and less power con-
sumption.
Installation
Consider temperature coefficients of Hall IC and
magnetics, as well as air gap life time variations. Ob-
serve temperature limits during wave soldering.
Application Comments
If reverse supply protection is desired, use a resistor
in series with the VDD pin. The resistor will limit the
supply current (Fault), IDD, to 50 mA. For severe
EMC conditions, use the application circuit below.
Applications Examples
Automotive and Severe
Environment Protection Circuit
R1 100
D1
Supply
Voltage
Z1
C1
4.7 nF
VDD
Hall IC
Vss
RL
1.2K
OUT
C2
4.7nF
Two Wire Optional Current
Biasing Circuit
V
DD
IIN
RL Iout
Hall
Rb IC
US5881 CMOS Multi-Purpose Switch
The resistors R b and RL can be used to bias the input current, IIN. Refer to
the part specification for limiting values. This circuit will help in getting the
precise ON and OFF currents desired.
BRP = Ioff = (VDD / Rb + IDD )
BOP = Ion = (Ioff + VDD / R L )
3901005881 Rev 5.0
24/July/01
Page 5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for US5881 electronic component.


Information Total 6 Pages
Link URL [ Copy URL to Clipboard ]
Download [ US5881.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
US5881The function is CMOS Multi-Purpose Switch. ETCETC

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

US58     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search