DataSheet39.com

What is US1261CT?

This electronic component, produced by the manufacturer "UNISEM", performs the same function as "DUAL 6A AND 1A LOW DROPOUT POSITIVE FIXED OUTPUT REGULATOR".


US1261CT Datasheet PDF - UNISEM

Part Number US1261CT
Description DUAL 6A AND 1A LOW DROPOUT POSITIVE FIXED OUTPUT REGULATOR
Manufacturers UNISEM 
Logo UNISEM Logo 


There is a preview and US1261CT download ( pdf file ) link at the bottom of this page.





Total 6 Pages



Preview 1 page

No Preview Available ! US1261CT datasheet, circuit

US1261
DUAL 6A AND 1A LOW DROPOUT
POSITIVE FIXED OUTPUT REGULATOR
FEATURES
Guaranteed to provide 1.5V and 2.5V Sup-
plies with 3.1V input.
Fast Transient Response
1% Voltage Reference Initial Accuracy
Built in Thermal Shutdown
APPLICATIONS
Pentium II Processor Applications
DESCRIPTION
The US1261 product using a proprietary process com-
bines a dual low dropout regulators with fixed outputs of
1.5V and 2.5V in a single package with the 1.5V out-
put having a minimum of 6A and the 2.5V having a 1A
output current capability. This product is specifically de-
signed to provide well regulated supplies from 3.3V to
generate 1.5V for GTL+ termination resistor supply
and 2.5V clock supply for the new generation of
the Pentium II processor applications.
TYPICAL APPLICATION
1261app1-1.3
3.3V
C1
Vout1 5
US1261
Vin 4
Gnd 3
Vout2 2
Vctrl 1
5V
R1
C2
2.5V / 1A
C3
1.5V / 6A
C4
Typical application of US1261 in a Pentium II processor application
PACKAGE ORDER INFORMATION
Tj (°C)
0 TO 150
5 PIN PLASTIC
TO220(T)
US1261CT
5 PIN PLASTIC
TO263(M)
US1261CM
5 PIN PLASTIC
POWER FLEX(P)
US1261CP
Rev. 1.7
3/22/99
3-1

line_dark_gray
US1261CT equivalent
US1261
select a heat sink that results in lower temperature rise Layout Consideration
than the one calculated in previous step. The following
heat sinks from AAVID and Thermaloy meet this crite- The US1261 like all other high speed linear regulators need
ria. to be properly laid out to insure stable operation. The most
Air Flow (LFM)
important component is the output capacitor, which
Thermalloy
AAVID
0 100 200 300 400 needs to be placed close to the output pin and con-
7021B 7020B 6021PB 7173D 7141D nected to this pin using a plane connection with a
593101B 551002B 534202B 577102B 576802B low inductance path.
Note : For further information regarding the above com-
panies and their latest product offering and application
support contact your local representative or the num-
bers listed below:
Thermalloy
AAVID
PH# (214) 243-4321
PH# (603) 528-3400
Example # 2 :
Assuming the following specifications :
VIN = 3.3V
VOUT 2 = 1.5 V
VOUT 1 = 2.5 V
IOUT 2 MAX = 1.5A
IOUT 1 MAX = 0.2 A
TA = 35° C
The steps for selecting a proper heat sink to keep the
junction temperature below 135°C is given as :
1) Calculate the maximum power dissipation using :
( ) ( )PD = IOUT1 × VIN VOUT1 + IOUT2 × VIN VOUT2
PD = 0.2 × (3.3 2.5) + 1.5 × (3.3 1.5) = 2.86 W
2) Assuming a TO-263 surface mount package, the junc-
tion to ambient thermal resistance of the package is:
θJA = 30° C / W for 1" square pad area
3) The maximum junction temperature of the device is cal-
culated using the equation below :
TJ = TA + PD × θJA
TJ = 35 + 2.86 × 30 = 121 ° C
Since this is lower than our selected 135°C maximum junc-
tion temperature (150°C is the thermal shutdown of the
device), TO-263 package is a suitable package for our ap-
plication.
Rev. 1.7
3/22/99
3-5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for US1261CT electronic component.


Information Total 6 Pages
Link URL [ Copy URL to Clipboard ]
Download [ US1261CT.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
US1261CMThe function is DUAL 6A AND 1A LOW DROPOUT POSITIVE FIXED OUTPUT REGULATOR. UNISEMUNISEM
US1261CPThe function is DUAL 6A AND 1A LOW DROPOUT POSITIVE FIXED OUTPUT REGULATOR. UNISEMUNISEM
US1261CTThe function is DUAL 6A AND 1A LOW DROPOUT POSITIVE FIXED OUTPUT REGULATOR. UNISEMUNISEM

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

US12     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search