DataSheet39.com

What is UPD75312?

This electronic component, produced by the manufacturer "NEC", performs the same function as "4-BIT SINGLE-CHIP MICROCOMPUTER".


UPD75312 Datasheet PDF - NEC

Part Number UPD75312
Description 4-BIT SINGLE-CHIP MICROCOMPUTER
Manufacturers NEC 
Logo NEC Logo 


There is a preview and UPD75312 download ( pdf file ) link at the bottom of this page.





Total 30 Pages



Preview 1 page

No Preview Available ! UPD75312 datasheet, circuit

DATA SHEET
MOS INTEGRATED CIRCUIT
µPD75312(A), 75316(A)
4-BIT SINGLE-CHIP MICROCOMPUTER
DESCRIPTION
The µPD75316(A) is one of the 75X Series 4-bit single-chip microcomputer having a built-in LCD controller/
driver, and has a data processing capability comparable to that of an 8-bit microcomputer.
In addition to high-speed operation with 0.95 µs minimum instruction execution time for the CPU, the
µPD75316(A) can also process data in 1-, 4-, and 8-bit units. Therefore, as a 4-bit single-chip microcomputer
chip having a built-in LCD panel controller/driver, its data processing capability is the highest in its class in
the world.
Detailed functions are described in the following user's manual. Be sure to read it for designing.
µPD75308 User's Manual: IEM-5016
FEATURES
Higher reliability than µPD75316
Internal memory
• Program memory (ROM)
: 16256 × 8 bits (µPD75316(A))
: 12160 × 8 bits (µPD75312(A))
• Data memory
: 512 × 4 bits
Capable of high-speed operation and variable instruction execution time to power save
• 0.95 µs, 1.91 µs, 15.3 µs (operating at 4.19 MHz)
• 122 µs (operating at 32.768 kHz)
75X architecture comparable to that for an 8-bit microcomputer is employed
Built-in programmable LCD controller/driver
Clock operation at reduced power dissipation: 5 µA TYP. (operating at 3 V)
Enhanced timer function (3 channels)
Interrupt functions especially enhanced for applications, such as remote control receiver
Pull-up resistors can be provided for 31 I/O lines
Built-in NEC standard serial bus interface (SBI)
Upgraded model of µPD7514 (µPD7500 Series)
PROM version (µPD75P316, µPD75P316A) available
APPLICATIONS
Suitable for controlling automotive and transportation equipment.
The µPD75316(A) is treated as the representative model throughout this document,
unless there are differences between µPD75312(A) and µPD75316(A) functions.
The information in this document is subject to change without notice.
Document No. IC-2825A
(O. D. No. IC-8270A)
Date Published December 1993 P
Printed in Japan
The mark 5 shows major revised points.
© NEC Corporation 1991

line_dark_gray
UPD75312 equivalent
µPD75312(A), 75316(A)
CONTENTS
1. PIN CONFIGURATION (Top View) ................................................................................................ 7
2. BLOCK DIAGRAM ........................................................................................................................... 8
3. PIN FUNCTIONS .............................................................................................................................. 9
3.1 PORT PINS ............................................................................................................................................. 9
3.2 NON PORT PINS ................................................................................................................................... 11
3.3 PIN INPUT/OUTPUT CIRCUITS ........................................................................................................... 13
3.4 RECOMMENDED PROCESSING OF UNUSED PINS .......................................................................... 15
3.5 NOTES ON USING THE P00/INT4, AND RESET PINS ...................................................................... 16
4. MEMORY CONFIGURATION .......................................................................................................... 16
5. PERIPHERAL HARDWARE FUNCTIONS ........................................................................................ 20
5.1 PORTS .................................................................................................................................................... 20
5.2 CLOCK GENERATOR CIRCUIT ............................................................................................................ 21
5.3 CLOCK OUTPUT CIRCUIT .................................................................................................................... 22
5.4 BASIC INTERVAL TIMER ..................................................................................................................... 23
5.5 WATCH TIMER ...................................................................................................................................... 24
5.6 TIMER/EVENT COUNTER ..................................................................................................................... 25
5.7 SERIAL INTERFACE .............................................................................................................................. 27
5.8 LCD CONTROLLER/DRIVER .................................................................................................................. 29
5.9 BIT SEQUENTIAL BUFFER ................................................................................................................... 31
6. INTERRUPT FUNCTIONS ................................................................................................................ 31
7. STANDBY FUNCTIONS .................................................................................................................. 33
8. RESET FUNCTION ........................................................................................................................... 34
9. INSTRUCTION SET ......................................................................................................................... 36
10. SELECTION OF MASK OPTION ..................................................................................................... 42
11. ELECTRICAL SPECIFICATIONS ...................................................................................................... 43
12. PACKAGE DRAWINGS ................................................................................................................... 55
5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for UPD75312 electronic component.


Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ UPD75312.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
UPD753104The function is 4-BIT SINGLE-CHIP MICROCONTROLLER. NECNEC
UPD753104GCThe function is 4-BIT SINGLE-CHIP MICROCONTROLLER. NECNEC
UPD753104GKThe function is 4-BIT SINGLE-CHIP MICROCONTROLLER. NECNEC

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

UPD7     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search