PDF 74ALVT162245 Data sheet ( Hoja de datos )

Número de pieza	74ALVT162245
Descripción	2.5V/3.3V ALVT 16-bit transceiver with 30ohm termination resistors 3-State
Fabricantes	NXP Semiconductors
Logotipo
Hay una vista previa y un enlace de descarga de 74ALVT162245 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas
No Preview Available ! INTEGRATED CIRCUITS 74ALVT162245 2.5V/3.3V ALVT 16-bit transceiver with 30W termination resistors (3-State) Product specification Supersedes data of 1996 Mar 05 IC23 Data Handbook 1998 Feb 13 Philips Semiconductors 1 page Philips Semiconductors 2.5V/3.3V 16-bit transceiver with 30Ω termination resistors (3-State) Product specification 74ALVT162245 DC ELECTRICAL CHARACTERISTICS (3.3V "0.3V RANGE) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40°C to +85°C UNIT MIN TYP1 MAX VIK VOH VOL II IOFF IHOLD IEX IPU/PD Input clamp voltage High-level output voltage Low–level output voltage Input leakage current Off current Bus Hold current Data inputs6 Current into an output in the High state when VO > VCC Power up/down 3-State output current3 VCC = 3.0V; IIK = –18mA VCC = 3.0V; IOH = –12mA VCC = 3.0V; IOL = 12mA VCC = 3.6V; VI = VCC or GND VCC = 0 or 3.6V; VI = 5.5V VCC = 3.6V; VI = VCC VCC = 3.6V; VI = 0V VCC = 0V; VI or VO = 0 to 4.5V VCC = 3V; VI = 0.8V VCC = 3V; VI = 2.0V VCC = 0V to 3.6V; VCC = 3.6V Control pins Data pins4 VO = 5.5V; VCC = 3.0V VCC ≤ 1.2V; VO = 0.5V to VCC; VI = GND or VCC OE/OE = Don’t care 2.0 75 –75 ±500 –0.85 2.3 0.6 0.1 01. 0.5 0.1 0.1 130 –140 –1.2 0.8 ±1 10 1 -5 ±100 50 125 40 ±100 V V V µA µA µA µA µA ICCH VCC = 3.6V; Outputs High, VI = GND or VCC, IO = 0 0.07 0.1 ICCL ICCZ Quiescent supply current VCC = 3.6V; Outputs Low, VI = GND or VCC, IO = 0 VCC = 3.6V; Outputs Disabled; VI = GND or VCC, IO = 05 3.5 5 0.07 0.1 mA ∆ICC Additional supply current per input pin2 VCC = 3V to 3.6V; One input at VCC–0.6V, Other inputs at VCC or GND 0.04 0.4 mA NOTES: 1. All typical values are at VCC = 3.3V and Tamb = 25°C. 2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND 3. This parameter is valid for any VCC between 0V and 1.2V with a transition time of up to 10msec. From VCC = 1.2V to VCC = 3.3V ± 0.3V a transition time of 100µsec is permitted. This parameter is valid for Tamb = 25°C only. 4. Unused pins at VCC or GND. 5. ICCZ is measured with outputs pulled up to VCC or pulled down to ground. 6. This is the bus hold overdrive current required to force the input to the opposite logic state. AC CHARACTERISTICS (3.3V "0.3V RANGE) GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω; Tamb = –40°C to +85°C. SYMBOL PARAMETER WAVEFORM tPLH Propagation delay tPHL nAx to nBx or nBx to nAx tPZH tPZL Output enable time to High and Low level tPHZ tPLZ Output disable time from High and Low Level NOTE: 1. All typical values are at VCC = 3.3V and Tamb = 25°C. 1 2 2 LIMITS VCC = 3.3V "0.3V MIN TYP1 MAX 0.5 2.3 3.6 0.5 2.0 3.1 1.0 3.0 5.0 1.0 2.6 3.9 1.0 3.6 5.2 1.0 3.0 4.6 UNIT ns ns ns 1998 Feb 13 5 5 Page

Páginas	Total 10 Páginas
PDF Descargar	[ Datasheet 74ALVT162245.PDF ]

Hoja de datos destacado

Número de pieza	Descripción	Fabricantes
74ALVT162240	16-bit inverting buffer/driver with 30ohm termination resistors (3-State)	NXP Semiconductors
74ALVT162241	2.5V/3.3V 16-bit buffer/driver with 30ohm termination resistors 3-State	NXP Semiconductors
74ALVT162244	2.5V/3.3V 16-bit buffer/driver with 30ohm termination resistors 3-State	NXP Semiconductors
74ALVT162245	2.5V/3.3V ALVT 16-bit transceiver with 30ohm termination resistors 3-State	NXP Semiconductors

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.

DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar