DataSheet39.com

What is 1032E-70LJ?

This electronic component, produced by the manufacturer "Lattice Semiconductor", performs the same function as "High-Density Programmable Logic".


1032E-70LJ Datasheet PDF - Lattice Semiconductor

Part Number 1032E-70LJ
Description High-Density Programmable Logic
Manufacturers Lattice Semiconductor 
Logo Lattice Semiconductor Logo 


There is a preview and 1032E-70LJ download ( pdf file ) link at the bottom of this page.





Total 16 Pages



Preview 1 page

No Preview Available ! 1032E-70LJ datasheet, circuit

ispLSI® and pLSI® 1032E
High-Density Programmable Logic
Features
• HIGH DENSITY PROGRAMMABLE LOGIC
— 6000 PLD Gates
— 64 I/O Pins, Eight Dedicated Inputs
— 192 Registers
— High Speed Global Interconnect
— Wide Input Gating for Fast Counters, State
Machines, Address Decoders, etc.
— Small Logic Block Size for Random Logic
• HIGH PERFORMANCE E2CMOS® TECHNOLOGY
fmax = 125 MHz Maximum Operating Frequency
tpd = 7.5 ns Propagation Delay
— TTL Compatible Inputs and Outputs
— Electrically Erasable and Reprogrammable
— Non-Volatile
— 100% Tested at Time of Manufacture
— Unused Product Term Shutdown Saves Power
• ispLSI OFFERS THE FOLLOWING ADDED FEATURES
— In-System Programmable (ISP™) 5-Volt Only
— Increased Manufacturing Yields, Reduced Time-to-
Market and Improved Product Quality
— Reprogram Soldered Devices for Faster Prototyping
• OFFERS THE EASE OF USE AND FAST SYSTEM
SPEED OF PLDs WITH THE DENSITY AND FLEXIBILITY
OF FIELD PROGRAMMABLE GATE ARRAYS
— Complete Programmable Device Can Combine Glue
Logic and Structured Designs
— Enhanced Pin Locking Capability
— Four Dedicated Clock Input Pins
— Synchronous and Asynchronous Clocks
— Programmable Output Slew Rate Control to
Minimize Switching Noise
— Flexible Pin Placement
— Optimized Global Routing Pool Provides Global
Interconnectivity
• ispEXPERT™ – LOGIC COMPILER AND COMPLETE
ISP DEVICE DESIGN SYSTEMS FROM HDL SYNTHESIS
THROUGH IN-SYSTEM PROGRAMMING
— Superior Quality of Results
— Tightly Integrated with Leading CAE Vendor Tools
— Productivity Enhancing Timing Analyzer, Explore
Tools, Timing Simulator and ispANALYZER™
— PC and UNIX Platforms
Functional Block Diagram
Output Routing Pool
D7 D6 D5 D4 D3 D2 D1 D0
A0 C7
DQ
A1 C6
A2 D Q
Logic
C5
A3 Array D Q GLB C4
A4 C3
A5 D Q C2
A6 C1
A7 Global Routing Pool (GRP) C0
B0 B1 B2 B3 B4 B5 B6 B7 CLK
Output Routing Pool
0139A(A1)-isp
Description
The ispLSI and pLSI 1032E are High Density Program-
mable Logic Devices containing 192 Registers, 64
Universal I/O pins, eight Dedicated Input pins, four Dedi-
cated Clock Input pins and a Global Routing Pool (GRP).
The GRP provides complete interconnectivity between
all of these elements. The ispLSI 1032E features 5-Volt
in-system programmability and in-system diagnostic ca-
pabilities. The ispLSI 1032E device offers non-volatile
reprogrammability of the logic, as well as the intercon-
nects to provide truly reconfigurable systems. It is
architecturally and parametrically compatible to the pLSI
1032E device, but multiplexes four input pins to control
in-system programming. A functional superset of the
ispLSI and pLSI 1032 architecture, the ispLSI and pLSI
1032E devices add two new global output enable pins.
The basic unit of logic on the ispLSI and pLSI 1032E
devices is the Generic Logic Block (GLB). The GLBs are
labeled A0, A1…D7 (see Figure 1). There are a total of 32
GLBs in the ispLSI and pLSI 1032E devices. Each GLB
has 18 inputs, a programmable AND/OR/Exclusive OR
array, and four outputs which can be configured to be
either combinatorial or registered. Inputs to the GLB
come from the GRP and dedicated inputs. All of the GLB
outputs are brought back into the GRP so that they can
be connected to the inputs of any GLB on the device.
Copyright © 1998 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A.
Tel. (503) 681-0118; 1-800-LATTICE; FAX (503) 681-3037; http://www.latticesemi.com
October 1998
1032E_06
1

line_dark_gray
1032E-70LJ equivalent
Specifications ispLSI and pLSI 1032E
External Timing Parameters
Over Recommended Operating Conditions
PARAMETER TEST 4 #2
COND.
DESCRIPTION1
-125
-100
UNITS
MIN. MAX. MIN. MAX.
tpd1
tpd2
fmax (Int.)
fmax (Ext.)
fmax (Tog.)
tsu1
A
A
A
1 Data Propagation Delay, 4PT Bypass, ORP Bypass
2 Data Propagation Delay, Worst Case Path
3 Clock Frequency with Internal Feedback 3
4
Clock
Frequency
with
External
Feedback
(
1
tsu2 +
)tco1
5
Clock
Frequency,
Max.
Toggle
(
1
twh +
)tw1
6 GLB Reg. Setup Time before Clock,4 PT Bypass
– 7.5 – 10.0
– 10.0 – 12.5
125 – 100 –
91.0 – 71.0 –
167 – 125 –
5.0 – 7.0 –
ns
ns
MHz
MHz
MHz
ns
tco1
A 7 GLB Reg. Clock to Output Delay, ORP Bypass
– 5.0 – 6.0 ns
th1 – 8 GLB Reg. Hold Time after Clock, 4 PT Bypass
0.0 – 0.0 –
ns
tsu2
tco2
th2
tr1
trw1
tptoeen
tptoedis
tgoeen
tgoedis
twh
twl
– 9 GLB Reg. Setup Time before Clock
– 10 GLB Reg. Clock to Output Delay
– 11 GLB Reg. Hold Time after Clock
A 12 Ext. Reset Pin to Output Delay
– 13 Ext. Reset Pulse Duration
B 14 Input to Output Enable
C 15 Input to Output Disable
B 16 Global OE Output Enable
C 17 Global OE Output Disable
– 18 External Synchronous Clock Pulse Duration, High
– 19 External Synchronous Clock Pulse Duration, Low
6.0 – 8.0 –
– 6.0 – 7.0
0.0 – 0.0 –
– 10.0 – 13.5
5.0 – 6.5 –
– 12.0 – 15.0
– 12.0 – 15.0
– 7.0 – 9.0
– 7.0 – 9.0
3.0 – 4.0 –
3.0 – 4.0 –
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
tsu3
– 20 I/O Reg. Setup Time before Ext. Sync Clock (Y2, Y3)
3.0 – 3.5 –
ns
th3 – 21 I/O Reg. Hold Time after Ext. Sync. Clock (Y2, Y3)
0.0 – 0.0 –
ns
1. Unless noted otherwise, all parameters use the GRP, 20 PTXOR path, ORP and Y0 clock.
2. Refer to Timing Model in this data sheet for further details.
3. Standard 16-bit counter using GRP feedback.
4. Reference Switching Test Conditions section.
Table 2-0030A/1032E
5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 1032E-70LJ electronic component.


Information Total 16 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 1032E-70LJ.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
1032E-70LJThe function is High-Density Programmable Logic. Lattice SemiconductorLattice Semiconductor
1032E-70LJIThe function is High-Density Programmable Logic. Lattice SemiconductorLattice Semiconductor
1032E-70LTThe function is High-Density Programmable Logic. Lattice SemiconductorLattice Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

1032     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search