HCPL-063A Datasheet PDF - Avago
Part Number | HCPL-063A | |
Description | Optocouplers | |
Manufacturers | Avago | |
Logo | ||
There is a preview and HCPL-063A download ( pdf file ) link at the bottom of this page. Total 17 Pages |
Preview 1 page No Preview Available ! HCPL-261A, HCPL-061A, HCPL-263A, HCPL-063A
HCPL-261N, HCPL-061N, HCPL-263N, HCPL-063N
HCMOS Compatible, High CMR, 10 MBd Optocouplers
Data Sheet
Lead (Pb) Free
RcoomHSpl6iafnutlly
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
The HCPL-261A family of optically coupled gates shown
on this data sheet provide all the benefits of the in-
dustry standard 6N137 family with the added benefit
of HCMOS compatible input current. This allows direct
interface to all common circuit topologies without ad-
ditional LED buffer or drive components. The AlGaAs
LED used allows lower drive currents and reduces
degradation by using the latest LED technology. On
the single channel parts, an enable output allows the de-
tector to be strobed. The output of the detector IC is an
open collector schottky-clamped transistor. The internal
shield provides a minimum common mode transient im-
munity of 1000 V/µs for the HCPL-261A family and 15000
V/µs for the HCPL-261N family.
Functional Diagram
HCPL-261A/261N
HCPL-061A/061N
NC 1
8 VCC
ANODE 2
7 VE
CATHODE 3
6 VO
NC 4 SHIELD
5 GND
HCPL-263A/263N
HCPL-063A/063N
ANODE 1 1
CATHODE 1 2
8 VCC
7 VO1
CATHODE 2 3
6 VO2
ANODE 2 4
SHIELD
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED
ON
OFF
ON
OFF
ON
OFF
ENABLE
H
H
L
L
NC
NC
OUTPUT
L
H
H
H
L
H
TRUTH TABLE
(POSITIVE LOGIC)
LED
ON
OFF
OUTPUT
L
H
• HCMOS/LSTTL/TTL performance compatible
• 1000 V/µs minimum Common Mode Rejection (CMR)
amtiVnCimM =um50CVM(HRCaPt LV-C2M6=1A10fa0m0 Vily()HaCnPdL-1256k1VN/µfasmily)
• High speed: 10 MBd typical
• AC and DC performance specified over industrial
temperature range -40°C to +85°C
• Available in 8 pin DIP, SOIC-8 packages
• Safety approval:
– UL recognized per UL1577 3750 Vrms for 1 minute
and 5000 Vrms for 1 minute (Option 020)
– CSA Approved
– IEC/EN/DIN EN 60747-5-2 approved
Applications
• Low input current (3.0 mA) HCMOS compatible
version of 6N137 optocoupler
• Isolated line receiver
• Simplex/multiplex data transmission
• Computer-peripheral interface
• Digital isolation for A/D, D/A conversion
• Switching power supplies
• Instrumentation input/output isolation
• Ground loop elimination
• Pulse transformer replacement
The connection of a 0.1 µF bypass capacitor between pins 5 and 8 is
required.
HCPL-261A Functional Diagram
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
|
|
HCPL-061A/061N/063A/063N Outline Drawing
LAND PATTERN RECOMMENDATION
8765
3.937 ± 0.127
(0.155 ± 0.005)
XXX
YWW
1234
5.994 ± 0.203
(0.236 ± 0.008)
TYPE NUMBER
(LAST 3 DIGITS)
DATE CODE
0.406 ± 0.076
(0.016 ± 0.003)
1.270
(0.050)
BSC
7.49 (0.295)
1.9 (0.075)
0.64 (0.025)
* 5.080 ± 0.127
(0.200 ± 0.005)
7
45
X
0.432
(0.017)
3.175 ± 0.127
(0.125 ± 0.005)
1.524
(0.060)
0.228 ± 0.025
(0.009 ± 0.001)
* TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH)
5.207 ± 0.254 (0.205 ± 0.010)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX.
Figure 3. 8-Pin Small Outline Package Device Drawing.
0.203 ± 0.102
(0.008 ± 0.004)
0.305
(0.012)
MIN.
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.
Solder Reflow Thermal Profile
300
PREHEATING RATE 3°C + 1°C/–0.5°C/SEC.
REFLOW HEATING RATE 2.5°C ± 0.5°C/SEC. PEAK
TEMP.
245°C
200
160°C
150°C
140°C
100
2.5 C ± 0.5°C/SEC.
3°C + 1°C/–0.5°C
PREHEATING TIME
150°C, 90 + 30 SEC.
30
SEC.
30
SEC.
PEAK
TEMP.
240°C
SOLDERING
TIME
200°C
PEAK
TEMP.
230°C
50 SEC.
ROOM
TEMPERATURE
00
TIGHT
TYPICAL
LOOSE
50 100 150 200 250
TIME (SECONDS)
Note: Non-halide flux should be used.
Recommended Pb-Free IR Profile
Tp 260 +0/-5 °C
TL 217 °C
RAMP-UP
3 C/SEC. MAX.
Tsmax 150 - 200 °C
Tsmin
ts
PREHEAT
60 to 180 SEC.
tp
tL
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
20-40 SEC.
RAMP-DOWN
6 °C/SEC. MAX.
60 to 150 SEC.
25
t 25 °C to PEAK
TIME
NOTES:
THE TIME FROM 25 °C to PEAK TEMPERATURE = 8 MINUTES MAX.
Tsmax = 200 °C, Tsmin = 150 °C
Note: Non-halide flux should be used.
Regulatory Information
The HCPL-261A and HCPL-261N
families have been approved by the
following organizations:
UL
Recognized under UL 1577, Com-
ponent Recognition Program, File
E55361.
CSA
Approved under CSA Component
Acceptance Notice #5, File CA
88324.
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884
Teil 2):2003-01.
(Option 060 only)
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for HCPL-063A electronic component. |
Information | Total 17 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ HCPL-063A.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
HCPL-0630 | The function is High Speed TTL Compatible Optocouplers. HP | |
HCPL-0630 | The function is High Speed TTL Compatible Optocouplers. Avago | |
HCPL-0631 | The function is High Speed TTL Compatible Optocouplers. HP | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
HCPL
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |