FH36W-19S-0.3SHW Datasheet PDF - Hirose Electric
Part Number | FH36W-19S-0.3SHW | |
Description | ZIF Connectors | |
Manufacturers | Hirose Electric | |
Logo | ||
There is a preview and FH36W-19S-0.3SHW download ( pdf file ) link at the bottom of this page. Total 12 Pages |
Preview 1 page No Preview Available ! 0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
FH36 Series
●Space saving (51 positions shown)
2.7mm
[51 Positions]
16.9mm
■Features
1. Low-profile and light weight
Weight: Reduced approximately 30%
Board footprint: Reduced approximately 15%
(As compared with Hirose Electric's FH26 Series
connectors (51 positions)
2. Easy solderability on the PC board
The soldering leads are on 0.6 mm pitch, exiting on
front and back of the connector.
3. Conducive traces on the PCB can run
under the connector
No exposed contacts on the bottom of the connector.
4. Easy FPC insertion and reliable
electrical connection
Proven Flip Lock actuator allows easy insertion of
FPC and provides a tactile sensation when fully
closed, confirming complete electrical and
mechanical connection.
5. FPC position hold
Tabs on each side of the FPC assure correct
placement and hold in the connector prior to
closing of the actuator.
6. Accepts standard FPC thickness
0.2mm thick standard Flexible Printed Circuit (FPC)
can be used. This is the only ultra-low profile ZIF
connector using standard FPC.
7. Board placement with automatic
equipment
Flat upper surface and tape and reel packaging
facilitate vacuum pick-up and placement.
Standard reel packaging contains 5,000
connectors.
8. Halogen-free *
(FH36W Series)
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
Metal fittings do not protrude outside of the connector body
●Can be mounted over conductive traces
No exposed contacts on the bottom of
the connector
●Operation
(1) Actuator open
(2) Insert FPC
Actuator
FPC
(3) Close the actuator
(4) FPC connected
●FPC temporary hold
2013.11
1
|
|
FH36 Series●0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
■Recommended FPC construction
●Contact FPC manufacturer for specific details.
1. Using Single-sided FPC
Connecting side
Back side
Material Name
Material
Material Thickness
(μm)
Covering film layer Polyimide 1 mil thick.
(25)
Cover adhesive
(25)
Surface treatment
Copper foil
0.2μm thick gold plated over 1 to 5μm
thick nickel underplating
Cu 1oz
3
35
Base adhesive
Thermosetting adhesive
25
Base film
Polyimide 1 mil thick
25
Reinforcement material adhesive Thermosetting adhesive
40
Stiffener
Polyimide 3 mil thick
75
Total
203
2. Using Double-sided FPC
Connecting side
Back side
Material Name
Material
Material Thickness
(μm)
Covering layer film Polyimide 1 mil thick
(25)
Cover adhesive
Surface treatment
Through-hole copper
0.2μm thick gold plated over 1 to 5μm
thick nickel underplating
Cu
(25)
3
15
Copper foil
Cu 1/2oz
18
Base adhesive
Thermosetting adhesive
18
Base film
Polyimide 1 mil thick
25
Base adhesive
Thermosetting adhesive
18
Copper foil
Cover adhesive
Cu 1/2oz
Thermosetting adhesive
(18)
25
Covering film layer Polyimide 1 mil thick
25
Reinforcement material adhesive Thermosetting adhesive
25
Stiffener
Polyimide 1 mil thick
25
Total
197
* To prevent release of the FPC due to its bending, use of the double sided FPC with copper foil on the back side is NOT
RECOMMENDED.
3.Precautions
1. This specification is a recommendation for the construction of the FH36 Series FPC (t=0.2 0.03)
2. For details about the construction, please contact the FPC manufacturers.
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for FH36W-19S-0.3SHW electronic component. |
Information | Total 12 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ FH36W-19S-0.3SHW.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
FH36W-19S-0.3SHW | The function is ZIF Connectors. Hirose Electric | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
FH36
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |