DataSheet39.com

What is RB058LAM-30?

This electronic component, produced by the manufacturer "ROHM Semiconductor", performs the same function as "Schottky Barrier Diode".


RB058LAM-30 Datasheet PDF - ROHM Semiconductor

Part Number RB058LAM-30
Description Schottky Barrier Diode
Manufacturers ROHM Semiconductor 
Logo ROHM Semiconductor Logo 


There is a preview and RB058LAM-30 download ( pdf file ) link at the bottom of this page.





Total 7 Pages



Preview 1 page

No Preview Available ! RB058LAM-30 datasheet, circuit

Schottky Barrier Diode
RB058LAM-30
Data Sheet
lApplications
General rectification
lFeatures
1) Small power mold type
(PMDTM)
2) High reliability
3) Super low IR
lDimensions (Unit : mm)
2.50±0.20
(1)
0.17±
0.10
0.05
lLand Size Figure (Unit : mm)
2.0
PMDTM
(2)
1.50±0.20
0.95±0.10
lStructure (1) Cathode
lConstruction
Silicon epitaxial planar type
ROHM : PMDTM
JEDEC : SOD-128
: Manufacture Date
lTaping Dimensions (Unit : mm)
2.00 ±0.05
4.0 ±0.1
φ1.5
+0.1
-0.0
(2) Anode
0.25 ±0.05
φ1.5
+0.1
-0.0
2.8 ±0.05
4.0 ±0.1
1.25 ±0.10
lAbsolute Maximum Ratings (Tc= 25°C)
Parameter
Symbol
Repetitive peak reverse voltage
Reverse voltage
Average forward rectified current
Non-repetitive forward current surge peak
VRM
VR
IO
IFSM
Operating junction temperature
Storage temperature
Tj
Tstg
Conditions
Duty0.5
Direct reverse voltage
Glass epoxy board mounted, 60Hz half
sin wave, resistive load, Tc=115ºC Max.
60Hz half sin wave, onecycle,
non-repetitive at Ta=25ºC
-
-
Limits Unit
30 V
30 V
3A
80 A
150 °C
-55 to +150 °C
lElectrical Characteristics (Tj = 25°C)
Parameter
Symbol
Forward voltage
Reverse current
VF
IR
Conditions
IF=3.0A
VR=30V
Min. Typ. Max. Unit
- - 0.68 V
- - 2.5 mA
www.rohm.com
© 2016 ROHM Co., Ltd. All rights reserved.
1/4
2016.09 - Rev.A

line_dark_gray
RB058LAM-30 equivalent
Notice
Precaution on using ROHM Products
1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (Specific Applications), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHMs Products for Specific
Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU CHINA
CLASS
CLASS
CLASS
CLASSb
CLASS
CLASS
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
4. The Products are not subject to radiation-proof design.
5. Please verify and confirm characteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in
the range that does not exceed the maximum junction temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PGA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.003


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for RB058LAM-30 electronic component.


Information Total 7 Pages
Link URL [ Copy URL to Clipboard ]
Download [ RB058LAM-30.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
RB058LAM-30The function is Schottky Barrier Diode. ROHM SemiconductorROHM Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

RB05     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search