DataSheet39.com

What is MB9BF104R?

This electronic component, produced by the manufacturer "Fujitsu", performs the same function as "32-bit Microcontroller".


MB9BF104R Datasheet PDF - Fujitsu

Part Number MB9BF104R
Description 32-bit Microcontroller
Manufacturers Fujitsu 
Logo Fujitsu Logo 


There is a preview and MB9BF104R download ( pdf file ) link at the bottom of this page.





Total 30 Pages



Preview 1 page

No Preview Available ! MB9BF104R datasheet, circuit

FUJITSU SEMICONDUCTOR
DATA SHEET
DS706-00007-1v0-E
32-bit ARMTM CortexTM-M3 based Microcontroller
FM3 MB9B100 Series
MB9BF104N/R, F105N/R, F106N/R
DESCRIPTION
The MB9B100 Series are a highly integrated 32-bit microcontroller that target for high-performance and
cost-sensitive embedded control applications.
The MB9B100 Series are based on the ARM Cortex-M3 Processor and on-chip Flash memory and SRAM,
and peripheral functions, including Motor Control Timers, ADCs and Communication Interfaces (UART,
SIO, I2C, LIN).
Note: ARM and Cortex-M3 are the trademarks of ARM Limited in the EU and other countries.
Copyright2010-2011 FUJITSU SEMICONDUCTOR LIMITED All rights reserved
2011.1

line_dark_gray
MB9BF104R equivalent
MB9B100 Series
CRC (Cyclic Redundancy Check) Accelerator
The CRC accelerator helps a verify data transmission or storage integrity.
CCITT CRC16 and IEEE-802.3 CRC32 are supported.
CCITT CRC16 Generator Polynomial: 0x1021
IEEE-802.3 CRC32 Generator Polynomial: 0x04C11DB7
Clock and Reset
[Clocks]
Five clock sources (2 ext. osc, 2 CR osc, and PLL) that are dynamically selectable.
Main Clock
: 4 to 48MHz
Sub Clock
: 32.768kHz
High-speed CR Clock : 4MHz
Low-speed CR Clock : 100kHz
PLL Clock
[Resets]
Reset requests from INITX pins, Power on reset, Software reset, watchdog timers reset, low voltage
detector reset and clock supervisor reset.
Clock Super Visor (CSV)
Clocks generated by CR oscillators are used to supervise abnormality of the external clocks.
External OSC clock failure (clock stop) is detected, reset is asserted.
External OSC frequency anomaly is detected, interrupt or reset is asserted.
Low Voltage Detector (LVD)
MB9B100 Series include 2-stage monitoring of voltage on the VCC. When the voltage falls below the
voltage has been set, Low Voltage Detector generates an interrupt or reset.
LVD1: error reporting via interrupt
LVD2: auto-reset operation
Low Power Mode
Three power saving modes supported.
SLEEP
TIMER
STOP
Debug
Serial Wire JTAG Debug Port (SWJ-DP)
Embedded Trace Macrocells (ETM) provide comprehensive debug and trace facilities.
Trace Port Interface Unit (TPIU) for bridging to a Trace Port Analyzer.
Power Supply
Two Power Supplies
VCC = 2.7V to 5.5V: Correspond to the wide range voltage.
DS706-00007-1v0-E
5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for MB9BF104R electronic component.


Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ MB9BF104R.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
MB9BF104NThe function is 32-bit Microcontroller. FujitsuFujitsu
MB9BF104NAThe function is Microcontroller. SpansionSpansion
MB9BF104NAThe function is 32-bit ARM Cortex-M3 based Microcontroller. FujitsuFujitsu

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

MB9B     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search