DataSheet39.com

What is BAS40-06HM?

This electronic component, produced by the manufacturer "ROHM Semiconductor", performs the same function as "Schottky Barrier Diode".


BAS40-06HM Datasheet PDF - ROHM Semiconductor

Part Number BAS40-06HM
Description Schottky Barrier Diode
Manufacturers ROHM Semiconductor 
Logo ROHM Semiconductor Logo 


There is a preview and BAS40-06HM download ( pdf file ) link at the bottom of this page.





Total 7 Pages



Preview 1 page

No Preview Available ! BAS40-06HM datasheet, circuit

Schottky Barrier Diode
BAS40-06HM
Datasheet
Application
Small current rectification
Dimensions (Unit : mm)
Land Size Figure (Unit : mm)
1.9
Features
1) Small mold type
(SOT-23)
2) High reliability
3) Low VF
Construction
Silicon epitaxial planar type
4C
ROHM : SSD3
JEDEC : SOT-23
JEITA : -
Taping Dimensions (Unit : mm)
2.4
1.0MIN
SOT-23
0.8MIN
Structure
(3) (1) Cathode
(2) Cathode
(3) Anode
(1) (2)
T116
Absolute Maximum Ratings (Ta= 25°C)
Parameter
Symbol
Repetitive peak reverse voltage
VRM
Reverse voltage
VR
Average forward rectified current
IF
Repetitive peak forward current
IFRM
Non-repetitive forward surge current IFSM
Operating junction temperature
Tj
Storage temperature
Tstg
Electrical Characteristics (Tj= 25°C)
Parameter
Symbol
VF1
Forward voltage
VF2
VF3
Reverse current
IR1
IR2
Conditions
Duty0.5
Direct reverse voltage
Direct current, per diode
t 1s, Duty0.5, per diode
Square wave, tp<10ms,
non-repetitive at Ta=25ºC, per diode
-
-
Limits Unit
40 V
40 V
120 mA
120 mA
0.6 A
150 °C
55 to 150 °C
Conditions
IF=1mA
IF=10mA
IF=40mA
VR=30V
VR=40V
Min. Typ. Max. Unit
- - 0.38 V
- - 0.50 V
- - 1V
- - 1 A
- - 10 A
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1/3
2016.11 - Rev.B

line_dark_gray
BAS40-06HM equivalent
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
A two-dimensional barcode printed on ROHM Products label is for ROHMs internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign
trade act, please consult with ROHM in case of export.
Precaution Regarding Intellectual Property Rights
1. All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data.
2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the
Products with other articles such as components, circuits, systems or external equipment (including software).
3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice-PGA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.003


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for BAS40-06HM electronic component.


Information Total 7 Pages
Link URL [ Copy URL to Clipboard ]
Download [ BAS40-06HM.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
BAS40-06HMThe function is Schottky Barrier Diode. ROHM SemiconductorROHM Semiconductor
BAS40-06HT1The function is Comon Anode Schottky Barrier Diode. Leshan Radio CompanyLeshan Radio Company

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

BAS4     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search