DataSheet39.com

What is SP8J5FRA?

This electronic component, produced by the manufacturer "ROHM Semiconductor", performs the same function as "4V Drive Pch+Pch MOS FET".


SP8J5FRA Datasheet PDF - ROHM Semiconductor

Part Number SP8J5FRA
Description 4V Drive Pch+Pch MOS FET
Manufacturers ROHM Semiconductor 
Logo ROHM Semiconductor Logo 


There is a preview and SP8J5FRA download ( pdf file ) link at the bottom of this page.





Total 7 Pages



Preview 1 page

No Preview Available ! SP8J5FRA datasheet, circuit

Transistors
4V Drive Pch+Pch MOS FET
SP8J5 FRA
SP8JS5PF8RJA5
AEC-Q101 Qualified
zStructure
Silicon P-channel MOS FET
zFeatures
1) Low On-resistance. (25m: at 4.5V)
2) High Power Package. (PD=2.0W)
3) High speed switching.
4) Low voltage drive. (4V)
zApplications
Power switching, DC-DC converter
zExternal dimensions (Unit : mm)
SOP8
5.0
0.4
1.75
(8) (5)
1pin mark
(1)
1.27
(4)
0.2
Each lead has same dimensions
zPackaging specifications
Type
Package
Code
Basic ordering unit (pieces)
SP8J5 FRA
Taping
TB
2500
zInner circuit
(8) (7) (6)
(5)
2 2
1 1
(1) (2) (3) (4)
zAbsolute maximum ratings (Ta=25qC)
<It is the same ratings for Tr1 and Tr2.>
1 ESD PROTECTION DIODE
2 BODY DIODE
Parameter
Drain-source voltage
Gate-source voltage
Drain current
Continuous
Pulsed
Source current
(Body diode)
Continuous
Pulsed
Total power dissipation
Channel temperature
Range of Storage temperature
1 Pw10μs, Duty cycle1%
2 Mounted on a ceramic board
Symbol
VDSS
VGSS
ID
IDP 1
IS
ISP 1
PD 2
Tch
Tstg
Limits
30
±20
±7.0
±28
1.6
28
2.0
150
55 to +150
Unit
V
V
A
A
A
A
W
°C
°C
(1) Tr1 Source
(2) Tr1 Gate
(3) Tr2 Source
(4) Tr2 Gate
(5) Tr2 Drain
(6) Tr2 Drain
(7) Tr1 Drain
(8) Tr1 Drain
zThermal resistance
Parameter
Channel to ambient
Mounted on a ceramic board.
Symbol
Rth(ch-a)
Limits
62.5
Unit
°C / W
Rev.A
1/4

line_dark_gray
SP8J5FRA equivalent
Notice
Precaution on using ROHM Products
1. If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1),
aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,
bodily injury or serious damage to property (Specific Applications), please consult with the ROHM sales
representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any
ROHMs Products for Specific Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU CHINA
CLASS
CLASS
CLASS
CLASSb
CLASS
CLASS
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below.
Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the
use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our
Products under any special or extraordinary environments or conditions (as exemplified below), your independent
verification and confirmation of product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
4. The Products are not subject to radiation-proof design.
5. Please verify and confirm characteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in
the range that does not exceed the maximum junction temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PAA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.003


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for SP8J5FRA electronic component.


Information Total 7 Pages
Link URL [ Copy URL to Clipboard ]
Download [ SP8J5FRA.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
SP8J5FRAThe function is 4V Drive Pch+Pch MOS FET. ROHM SemiconductorROHM Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

SP8J     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search