|
|
Número de pieza | BD4275FP2-C | |
Descripción | 500 mA Output LDO Regulator | |
Fabricantes | ROHM Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de BD4275FP2-C (archivo pdf) en la parte inferior de esta página. Total 23 Páginas | ||
No Preview Available ! Datasheet
LDO Regulators with Voltage Detector
500 mA Output LDO Regulator
with Voltage Detector
BD4275FP2-C BD4275FPJ-C
General Description
BD4275FP2-C and BD4275FPJ-C are automotive suited
voltage regulator with 1ch Reset and offers the output
current of 500mA while limiting the low quiescent current.
These regulators are therefore ideal for applications
requiring a direct connection to the battery and a low
current consumption. A reset signal is generated for an
output voltage VO of Typ 4.62 V.
The reset delay time can be programmed by the external
capacitor.
Features
Low ESR ceramic capacitors applicable for output.
Low drop voltage: PDMOS output transistor
Power on and under-voltage reset
Programmable reset delay time by external capacitor.
Applications
Onboard vehicle device (body-control, car stereos,
satellite navigation system, etc)
Key Specifications
Qualified for Automotive Applications
Input Voltage Range:
-0.3 V to +45 V
Low Quiescent Current:
65 μA (Typ)
Output Load Current:
500 mA
Output Voltage:
5.0 V ±2 %
Reset Detect Voltage Accuracy: 4.62 V ±2.5 %
Over Current Protection (OCP)
Thermal Shut Down (TSD)
AEC-Q100 qualified.
Package
W (Typ) × D (Typ) × H (Max)
FP2: TO263-5F 10.16 mm × 15.10 mm × 4.70 mm
FPJ: TO252-J5F 6.60 mm × 10.10 mm × 2.38 mm
Typical Application Circuit
VIN
Figure 1. Package Outlook
VCC
VO
5V Output
CT RO
GND
Reset Output
Figure 2. Typical Application Circuit
○Product structure:Silicon monolithic integrated circuit
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111・14・001
○This product is not designed protection against radioactive rays
1/20
TSZ02201-0T2T0AN00110-1-2
29.Nov.2013 Rev.003
1 page BD4275FP2-C BD4275FPJ-C
Datasheet
Electrical Characteristics
( Unless otherwise specified , Tj = -40 °C to +150 °C, VCC = 13.5 V )
Parameter
Limits
Symbol
Min Typ
Circuit Current
ICC - 65
Output Voltage 1
VO 4.90 5.00
Output Voltage 2
Dropout Voltage
Load Regulation
Line Regulation
Current Limit
Ripple Rejection
Thermal Shut Down Temperature
VO
ᇞVd
Reg.L
Reg.I
IOCP
R.R.
TTSD
4.90
-
-
-15
500
-
-
5.00
0.25
10
-
-
60
175
Max
150
5.10
5.10
0.5
30
15
-
-
-
Unit Conditions
μA IO = 0 mA
V
5 mA ≤ IO ≤ 400 mA
6 V ≤ VCC ≤ 28 V
V
5 mA ≤ IO ≤ 200 mA
6 V ≤ VCC ≤ 40 V
V VCC = 4.75 V, IO = 300 mA
mV IO = 10 mA to 250 mA
mV VCC = 8 V to 16 V, IO = 5 mA
mA -
f = 120 Hz, ein = 1 Vrms,
dB IO = 100 mA
°C
Electrical Characteristics (Reset Function)
( Unless otherwise specified , Tj = -40 °C to +150 °C, VCC = 13.5 V )
Parameter
Limits
Symbol
Unit
Min Typ Max
Conditions
Switching Threshold
Switching Hysteresis
Upper Delay Switching Threshold
Lower Delay Switching Threshold
Charge Current
Delay time L→H
VRT
VRHY
VCTH
VCTL
ICT
tPOR
4.50 4.62 4.75
20 60 100
- 1.18 -
- 0.25 -
- 8.8 -
10 14 18
RO L Voltage
VROL
-
- 0.4
(1) TPOR can be varied by changing the CT capacitance value. ( 0.001µF to 10 µF available )
V-
mV -
V-
V-
μA VCT = 0.5 V
ms CCT = 0.1 μF (1)
RO pull-up resister ≥ 4.7 kΩ
V VO ≥1V
TPOR (ms) ≈ TPOR0 ( the reset delay time at CCT = 0.1 µF ) × CCT (μF) / 0.1
example: When CCT= 1µF, 100ms ≤ TPOR ≤ 180 ms
CT capacitor : 0.1µF ≤ CCT ≤ 10 μF
TPOR (ms) ≈ TPOR0 ( the reset delay time at CCT = 0.1 µF ) × CCT (μF) / 0.1 ±0.1
example: When CCT= 0.01µF, 0.9ms ≤ TPOR ≤ 1.9 ms
CT capacitor : 0.001µF ≤ CCT < 0.1 μF
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
5/20
TSZ02201-0T2T0AN00110-1-2
29.Nov.2013 Rev.003
5 Page BD4275FP2-C BD4275FPJ-C
Datasheet
Power Dissipation
■TO263-5F
10
④8.0W
8
6
③5.0W
IC mounted on ROHM standard board based on JEDEC.
Board material: FR4
Board size: 114.3 mm × 76.2 mm × 1.6 mmt
(with thermal via on the board)
Mount condition: PCB and exposed pad are soldered.
Top copper foil: The footprint ROHM recommend.
+ wiring to measure.
4
②2.3W
2
①1.9W
0
0 25 50 75 100 125 150
Ambient Temperture: Ta[˚C]
Figure 21. Package data of TO263-5F
①: 1-layer PCB
(Copper foil area on the reverse side of PCB: 0 mm × 0 mm)
②: 2-layer PCB
(Copper foil area on the reverse side of PCB: 15.0mm × 15.0 mm)
③: 2-layer PCB
(Copper foil area on the reverse side of PCB: 74.2mm × 74.2 mm)
④: 4-layer PCB
(2inner layers and copper foil area on the reverse side of PCB:
74.2mm × 74.2 mm)
■TO252-J5F
10
8
④6.5 W
6
IC mounted on ROHM standard board based on JEDEC.
Board material: FR4
Board size: 114.3 mm × 76.2 mm × 1.6 mmt
(with thermal via on the board)
Mount condition: PCB and exposed pad are soldered.
Top copper foil: The footprint ROHM recommend.
+ wiring to measure.
③4.1 W
4
②1.8 W
2
①1.3 W
0
0 25
50
75 100 125 150
Ambient Temperature: Ta [°C]
Figure 22. Package data of TO252-J5F
①: 1-layer PCB
(Copper foil area on the reverse side of PCB: 0 mm × 0 mm)
②: 2-layer PCB
(Copper foil area on the reverse side of PCB: 15.0mm × 15.0 mm)
③: 2-layer PCB
(Copper foil area on the reverse side of PCB: 74.2mm × 74.2 mm)
④: 4-layer PCB
(2 inner layers and copper foil area on the reverse side of PCB:
74.2mm × 74.2 mm)
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
11/20
TSZ02201-0T2T0AN00110-1-2
29.Nov.2013 Rev.003
11 Page |
Páginas | Total 23 Páginas | |
PDF Descargar | [ Datasheet BD4275FP2-C.PDF ] |
Número de pieza | Descripción | Fabricantes |
BD4275FP2-C | 500 mA Output LDO Regulator | ROHM Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |