DataSheet39.com

What is GS81302D06E-500I?

This electronic component, produced by the manufacturer "GSI Technology", performs the same function as "144Mb SigmaQuad-II+ Burst of 4 SRAM".


GS81302D06E-500I Datasheet PDF - GSI Technology

Part Number GS81302D06E-500I
Description 144Mb SigmaQuad-II+ Burst of 4 SRAM
Manufacturers GSI Technology 
Logo GSI Technology Logo 


There is a preview and GS81302D06E-500I download ( pdf file ) link at the bottom of this page.





Total 30 Pages



Preview 1 page

No Preview Available ! GS81302D06E-500I datasheet, circuit

GS81302D06/11/20/38E-500/450/400/350
165-Bump BGA
Commercial Temp
Industrial Temp
144Mb SigmaQuad-II+
Burst of 4 SRAM
500 MHz–350 MHz
1.8 V VDD
1.8 V or 1.5 V I/O
Features
• 2.5 Clock Latency
• Simultaneous Read and Write SigmaQuad™ Interface
• JEDEC-standard pinout and package
• Dual Double Data Rate interface
• Byte Write controls sampled at data-in time
• Burst of 4 Read and Write
• On-Die Termination (ODT) on Data (D), Byte Write (BW),
and Clock (K, K) intputs
• 1.8 V +100/–100 mV core power supply
• 1.5 V or 1.8 V HSTL Interface
• Pipelined read operation
• Fully coherent read and write pipelines
• ZQ pin for programmable output drive strength
• Data Valid Pin (QVLD) Support
• IEEE 1149.1 JTAG-compliant Boundary Scan
• 165-bump, 15 mm x 17 mm, 1 mm bump pitch BGA package
• RoHS-compliant 165-bump BGA package available
SigmaQuadFamily Overview
The GS81302D06/11/20/38E are built in compliance with the
SigmaQuad-II+ SRAM pinout standard for Separate I/O
synchronous SRAMs. They are 150,994,944-bit (144Mb)
SRAMs. The GS81302D06/11/20/38E SigmaQuad SRAMs
are just one element in a family of low power, low voltage
HSTL I/O SRAMs designed to operate at the speeds needed to
implement economical high performance networking systems.
Clocking and Addressing Schemes
The GS81302D06/11/20/38E SigmaQuad-II+ SRAMs are
synchronous devices. They employ two input register clock
inputs, K and K. K and K are independent single-ended clock
inputs, not differential inputs to a single differential clock input
buffer.
Each internal read and write operation in a SigmaQuad-II+ B4
RAM is four times wider than the device I/O bus. An input
data bus de-multiplexer is used to accumulate incoming data
before it is simultaneously written to the memory array. An
output data multiplexer is used to capture the data produced
from a single memory array read and then route it to the
appropriate output drivers as needed. Therefore the address
field of a SigmaQuad-II+ B4 RAM is always two address pins
less than the advertised index depth (e.g., the 16M x 8 has a
4M addressable index).
tKHKH
tKHQV
Parameter Synopsis
-500
2.0 ns
0.45 ns
-450
2.2 ns
0.45 ns
-400
2.5 ns
0.45 ns
-350
2.86 ns
0.45 ns
Rev: 1.05b 6/2014
1/31
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2011, GSI Technology

line_dark_gray
GS81302D06E-500I equivalent
GS81302D06/11/20/38E-500/450/400/350
16M x 8 SigmaQuad-II SRAM—Top View
123456789
A CQ SA SA W NW1 K SA R SA
B
NC
NC
NC
SA
NC/SA
(288Mb)
K
NW0 SA
NC
C NC NC NC VSS SA NC SA VSS NC
D NC D4 NC VSS VSS VSS VSS VSS NC
E
NC
NC
Q4
VDDQ
VSS
VSS
VSS VDDQ NC
F
NC
NC
NC
VDDQ
VDD
VSS
VDD VDDQ NC
G
NC D5
Q5
VDDQ
VDD
VSS
VDD VDDQ NC
H
Doff
VREF
VDDQ
VDDQ
VDD
VSS
VDD
VDDQ
VDDQ
J
NC
NC
NC
VDDQ
VDD
VSS
VDD VDDQ NC
K
NC
NC
NC
VDDQ
VDD
VSS
VDD VDDQ NC
L
NC
Q6
D6
VDDQ
VSS
VSS
VSS VDDQ
NC
M NC NC NC VSS VSS VSS VSS VSS NC
N NC D7 NC VSS SA SA SA VSS NC
P NC NC Q7 SA SA QVLD SA SA NC
R
TDO TCK
SA
SA
SA ODT SA
SA
SA
11 x 15 Bump BGA—15 x 17 mm2 Body—1 mm Bump Pitch
Notes:
1. NW0 controls writes to D0:D3. NW1 controls writes to D4:D7.
2. Pin B5 is the expansion address.
10
SA
NC
NC
NC
D2
NC
NC
VREF
Q1
NC
NC
NC
NC
NC
TMS
11
CQ
Q3
D3
NC
Q2
NC
NC
ZQ
D1
NC
Q0
D0
NC
NC
TDI
Rev: 1.05b 6/2014
5/31
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2011, GSI Technology


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for GS81302D06E-500I electronic component.


Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ GS81302D06E-500I.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
GS81302D06E-500The function is 144Mb SigmaQuad-II+ Burst of 4 SRAM. GSI TechnologyGSI Technology
GS81302D06E-500IThe function is 144Mb SigmaQuad-II+ Burst of 4 SRAM. GSI TechnologyGSI Technology

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

GS81     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search