DataSheet39.com

What is GS2986?

This electronic component, produced by the manufacturer "Semtech", performs the same function as "Multi-Rate SDI Reclocker".


GS2986 Datasheet PDF - Semtech

Part Number GS2986
Description Multi-Rate SDI Reclocker
Manufacturers Semtech 
Logo Semtech Logo 


There is a preview and GS2986 download ( pdf file ) link at the bottom of this page.





Total 30 Pages



Preview 1 page

No Preview Available ! GS2986 datasheet, circuit

GS2986
GS2986 Multi-Rate SDI Reclocker with Equalization & De-emphasis
Features
• SMPTE 424M, SMPTE 292M and SMPTE 259M-C compliant
• Supports DVB-ASI at 270Mb/s
• Single supply operation at 3.3V or 2.5V
• 180mW typical power consumption (213mW with RCO
enabled) at 2.5V
• Input signal equalization and output-signal de-emphasis
settings to compensate for board-trace dielectric losses
• 4:1 input multiplexer patented technology
• Choice of dual reclocked data outputs or one reclocked data
output and one clock output
• Uses standard 27MHz crystal
• Cascadable crystal buffer supports multiple reclockers using
a single crystal
• Differential inputs and outputs
Š support DC coupling to industry-standard differential
logic
Š on-chip 100Ω differential data input/output termination
Š selectable 400mVppd or 800mVppd output swing on
each output
Š seamless interface to other Gennum products
• 4 wire SPI host interface for device configuration and
monitoring
• Standard logic control and status signal levels
• Auto and Manual modes for rate selection
• Standards indication in Auto mode
• Lock Detect Output
• Mute, Bypass and Autobypass functions
• SD/HD indication output to control GS2978 or GS2988 dual
slew-rate cable drivers
• Operating temperature range: -40°C to +85°C
• Small footprint QFN package (6mm x 6mm)
• Pb-free and RoHS compliant
Applications
• SMPTE 424M, SMPTE 292M and SMPTE 259M-C coaxial
cable serial digital interfaces
Description
The GS2986 is a multi-rate serial digital reclocker designed to
automatically recover the embedded clock from a digital video
signal and retime the incoming video data. It will recover the
embedded clock signal and retime the data from a SMPTE 424M,
SMPTE 292M, or SMPTE 259M-C compliant digital video signal.
A serial host interface provides the ability to configure and
monitor multiple GS2986 devices in a daisy-chain configuration.
Adjustable input trace equalization (EQ) for up to 40” of FR4 trace
losses, and adjustable output de-emphasis (DE) for up to 20” of
FR4 trace losses, can be configured via the host interface.
The GS2986 can operate in either auto or manual rate selection
mode. In Auto mode, the device will automatically detect and lock
onto incoming SMPTE SDI data signals at any supported rate. For
single rate data systems, the GS2986 can be configured to operate
in Manual mode. In both modes, the device requires only one
external crystal to set the VCO frequency when not locked and
provides adjustment free operation.
The GS2986 accepts industry-standard differential input levels
including LVPECL and CML. The differential data and clock
outputs feature selectable output swing via the host interface,
ensuring compatibility with most industry-standard, terminated
differential receivers.
The GS2986 features dual differential outputs. The second output
can be configured to emit either the recovered clock signal or the
re-timed video data. This output can also be disabled to save
power.
In systems which require passing of non-SMPTE data rates, the
GS2986 can be configured to either automatically or manually
enter a bypass mode in order to pass the signal without reclocking.
The GS2986 is Pb-free, and the encapsulation compound does not
contain halogenated flame retardant. This component and all
homogeneous sub-components are RoHS compliant.
GS2986 Multi-Rate SDI Reclocker with Equalization &
De-emphasis
Data Sheet
52134 - 3
July 2012
www.semtech.com
1 of 41

line_dark_gray
GS2986 equivalent
1. Pin Out
1.1 Pin Assignment
CP_CAP
DDI0
HIF
DDI0
DDI1
DDI1
DDI2
DDI2
DDI3
DDI3
40 39 38 37 36 35 34 33 32 31
1
2
3
4 GS2986
5 40-pin QFN
6 (top view)
7
8
9
10
11 12 13 14 15 16 17 18 19 20
30
29
28
27
26
25
24
23
22
21
Ground Pad
(bottom of package)
VEE_DDO0
VCC_DDO0
DDO0
DDO0
VEE_DDO1
VCC_DDO1
DDO1/RCO
DDO1/RCO
DDO1_DISABLE
SD/HD
Figure 1-1: GS2986 Pin Out
GS2986 Multi-Rate SDI Reclocker with Equalization &
De-emphasis
Data Sheet
52134 - 3
July 2012
5 of 41


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for GS2986 electronic component.


Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ GS2986.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
GS2984The function is Adaptive Cable Equalizer. GennumGennum
GS2985The function is Multi-Rate SDI Reclocker. SemtechSemtech
GS2985The function is Multi-Rate SDI Reclocker. GennumGennum

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

GS29     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search