DataSheet39.com

What is 74161A?

This electronic component, produced by the manufacturer "Fairchild Semiconductor", performs the same function as "Synchronous 4-Bit Binary Counters".


74161A Datasheet PDF - Fairchild Semiconductor

Part Number 74161A
Description Synchronous 4-Bit Binary Counters
Manufacturers Fairchild Semiconductor 
Logo Fairchild Semiconductor Logo 


There is a preview and 74161A download ( pdf file ) link at the bottom of this page.





Total 10 Pages



Preview 1 page

No Preview Available ! 74161A datasheet, circuit

August 1986
Revised April 2000
DM74LS161A • DM74LS163A
Synchronous 4-Bit Binary Counters
General Description
These synchronous, presettable counters feature an inter-
nal carry look-ahead for application in high-speed counting
designs. The DM74LS161A and DM74LS163A are 4-bit
binary counters. The carry output is decoded by means of
a NOR gate, thus preventing spikes during the normal
counting mode of operation. Synchronous operation is pro-
vided by having all flip-flops clocked simultaneously so that
the outputs change coincident with each other when so
instructed by the count-enable inputs and internal gating.
This mode of operation eliminates the output counting
spikes which are normally associated with asynchronous
(ripple clock) counters. A buffered clock input triggers the
four flip-flops on the rising (positive-going) edge of the
clock input waveform.
These counters are fully programmable; that is, the outputs
may be preset to either level. As presetting is synchronous,
setting up a low level at the load input disables the counter
and causes the outputs to agree with the setup data after
the next clock pulse, regardless of the levels of the enable
input. The clear function for the DM74LS161A is asynchro-
nous; and a low level at the clear input sets all four of the
flip-flop outputs LOW, regardless of the levels of clock,
load, or enable inputs. The clear function for the
DM74LS163A is synchronous; and a low level at the clear
inputs sets all four of the flip-flop outputs LOW after the
next clock pulse, regardless of the levels of the enable
inputs. This synchronous clear allows the count length to
be modified easily, as decoding the maximum count
desired can be accomplished with one external NAND
gate. The gate output is connected to the clear input to
synchronously clear the counter to all low outputs.
The carry look-ahead circuitry provides for cascading
counters for n-bit synchronous applications without addi-
tional gating. Instrumental in accomplishing this function
are two count-enable inputs and a ripple carry output.
Both count-enable inputs (P and T) must be HIGH to count,
and input T is fed forward to enable the ripple carry output.
The ripple carry output thus enabled will produce a high-
level output pulse with a duration approximately equal to
the high-level portion of the QA output. This high-level over-
flow ripple carry pulse can be used to enable successive
cascaded stages. HIGH-to-LOW level transitions at the
enable P or T inputs may occur, regardless of the logic
level of the clock.
These counters feature a fully independent clock circuit.
Changes made to control inputs (enable P or T or load) that
will modify the operating mode have no effect until clocking
occurs. The function of the counter (whether enabled, dis-
abled, loading, or counting) will be dictated solely by the
conditions meeting the stable set-up and hold times.
Features
s Synchronously programmable
s Internal look-ahead for fast counting
s Carry output for n-bit cascading
s Synchronous counting
s Load control line
s Diode-clamped inputs
s Typical propagation time, clock to Q output 14 ns
s Typical clock frequency 32 MHz
s Typical power dissipation 93 mW
Ordering Code:
Order Number Package Number
Package Description
DM74LS161AM
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
DM74LS161AN
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
DM74LS163AM
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
DM74LS163AN
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
© 2000 Fairchild Semiconductor Corporation DS006397
www.fairchildsemi.com

line_dark_gray
74161A equivalent
Absolute Maximum Ratings(Note 1)
Supply Voltage
7V
Input Voltage
7V
Operating Free Air Temperature Range 0°C to +70°C
Storage Temperature Range
65°C to +150°C
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
DM74LS161A Recommended Operating Conditions
Symbol
Parameter
VCC Supply Voltage
VIH HIGH Level Input Voltage
VIL LOW Level Input Voltage
IOH HIGH Level Output Current
IOL LOW Level Output Current
fCLK Clock Frequency (Note 2)
Clock Frequency (Note 3)
tW
Pulse Width
Clock
(Note 2)
Clear
Pulse Width
Clock
(Note 3)
Clear
tSU
Setup Time
Data
(Note 2)
Enable P
Load
Setup Time
Data
(Note 3)
Enable P
Load
tH
Hold Time
Data
(Note 2)
Others
Hold Time
Data
(Note 3)
Others
tREL Clear Release Time (Note 2)
Clear Release Time (Note 3)
TA Free Air Operating Temperature
Note 2: CL = 15 pF, RL = 2 k, TA = 25°C and VCC = 5.5V.
Note 3: CL = 50 pF, RL = 2 k, TA = 25°C and VCC = 5.5V.
Min Nom Max Units
4.75 5 5.25 V
2V
0.8 V
0.4
mA
8 mA
0 25 MHz
0 20 MHz
20 6
20 9
ns
25
ns
25
20 8
25 17
ns
25 15
20
30 ns
30
0 3
0 3
ns
5
ns
5
20 ns
25 ns
0 70 °C
5 www.fairchildsemi.com


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 74161A electronic component.


Information Total 10 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 74161A.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
74161The function is 4-bit binary synchronous counter. ETCETC
74161The function is SYNCHRONOUS 4-BIT COUNTERS. Texas InstrumentsTexas Instruments
74161The function is SYNCHRONOUS PRESETTABLE 4-BIT COUNTER. SGS-THOMSONSGS-THOMSON

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

7416     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search