DataSheet39.com

What is GP1UM27XK?

This electronic component, produced by the manufacturer "Sharp Electrionic Components", performs the same function as "Compact IR Detecting Unit".


GP1UM27XK Datasheet PDF - Sharp Electrionic Components

Part Number GP1UM27XK
Description Compact IR Detecting Unit
Manufacturers Sharp Electrionic Components 
Logo Sharp Electrionic Components Logo 


There is a preview and GP1UM27XK download ( pdf file ) link at the bottom of this page.





Total 7 Pages



Preview 1 page

No Preview Available ! GP1UM27XK datasheet, circuit

GP1UM26XK/27XK/28XK/28YK Series
GP1UM26XK/GP1UM27XK Series Compact IR Detecting Unit
GP1UM28XK/GP1UM28YK Series for Remote Control
s Features
1. Compact (case volume).
2. Various B.P.F. (Band Pass Frequency) frequency to meet
different user needs.
s Applications
1. AV equipments
2. Home appliances
s Outline Dimensions
GP1UM26XK Series
1.25 1.25
GP1UM27XK Series
1.25 1.25
(Unit : mm)
1.8 5 3.6
5.6
0.7 0.7
0.5 1 2 3
*1 2.54
*1 2.54
R2.1
*23.6±0.5
8.6±0.5
*3 5.8
*3 2.9
1.4
2.9 *3
1.4
1 VOUT
2 VCC
3 GND
Center of PD
3 2 1 3−φ0.8
2.54 2.54
Example of mounting drawing from solder side (Reference)
1.*1 : Indicates root dimensions of connector.
2.Unspecified tolerance : ±0.3
3.Case thickness : 0.3TYP
4.*2 : Exclude sagged solder
5.*3 : If there are difficulties to insert the GP1UM26XK series on PCB,
we recommend to expand +0.1mm from original 2.9mm.
1.8 10.2 3.6
5.6
0.8 0.8
R2.1
*23.6±0.5
13.8±0.5
*3 5.8
*3 2.9
1.4
2.9 *3
1.4
0.5 1 2 3
*1 2.54
*1 2.54
1 VOUT
2 VCC
3 GND
Center of PD
3 2 1 3−φ0.8
2.54 2.54
Example of mounting drawing from solder side (Reference)
1.*1 : Indicates root dimensions of connector.
2.Unspecified tolerance : ±0.3
3.Case thickness : 0.3TYP
4.*2 : Exclude sagged solder
5.*3 : If there are difficulties to insert the GP1UM27XK series on PCB,
we recommend to expand +0.1mm from original 2.9mm.
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://sharp-world.com/ecg/

line_dark_gray
GP1UM27XK equivalent
GP1UM26XK/27XK/28XK/28YK Series
s Precautions for Operation
1. When this infrared remote control detecting unit shall be adopted for wireless remote control, please use it with the signal format of
n
transmitter, which total duty ratio Dt (Emitting time Σ tN / Transmitting time for 1 block T) is 40% or less. ON signal time TON
N=1
(Pulse width of the presence of modulated IR) should be 250(200:In case of B.P.F center frequency:56.8kHz model)µs or more. In
case that the signal format of total duty and ON signal time is out of above conditions, there is a case that reception distance is
much reduced or output is not appeared.
Transmitting time for 1 block:T
TON
t1 t2 t3
n
Dt=( Σ tN / T)×100 (%)
N=1
tn
2. Use the light emitting unit (remote control transmitter), in consideration of performance, characteristics, operating conditions of
light emitting device and the characteristics of the light detecting unit.
3. Pay attention to a malfunction of the light detecting unit when the surface is stained with dust and refuse.
Care must be taken not to touch the light detector surface.
If it should be dirty, wipe off such dust and refuse with soft cloth so as to prevent scratch. In case some solvents are required, use
methyl alcohol, ethyl alcohol or isopropyl alcohol only.
Also, protect the light detecting unit against flux and others, since their deposition on the unit inside causes reduction of the
function, fading of markings such as the part number.
4. The shield case should be grounded on PCB pattern.
(The area across the shield case and the GND terminal is internally conductive in some cases and non-conductive in some other
cases.)
5. Do not apply unnecessary force to the terminal and the case.
6. Do not push the light detector surface (photodiode) from outside.
7. To avoid the electrostatic breakdown of IC, handle the unit under the condition of grounding with human body, soldering iron, etc.
8. Do not use hole and groove set in the case of the light detecting unit for other purposes, since they are required to maintain the
specified performance.
9. External Circuit Examples (Mount the outer parts as near the unit as possible).
GND
VCC
VOUT
CO
+
GND
R1
Ve
(Circuit parameters)
VO R1=47Ω±5%
C1=47µF
In setting R1 and C1, use suitable values after considering under the real condition
The circuit constant is a example. It is difference from mounting equipment. Please select it by your mounting equipment.
This device has a transistor as protection element between VCC and GND to improve anti-static electricity proof.
Please be carefully not to apply exceeding the absolute maximum ratings of applying voltage and continuous high voltage spike
noise because there is cases that transistor will be short by secondary breakdown generally. In order to do difficultly, Please add
CR filter(47(1/10W), 10µF or more)such as external circuit example above near VCC.


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for GP1UM27XK electronic component.


Information Total 7 Pages
Link URL [ Copy URL to Clipboard ]
Download [ GP1UM27XK.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
GP1UM27XKThe function is IR Detecting Unit. SharpSharp
GP1UM27XKThe function is Compact IR Detecting Unit. Sharp Electrionic ComponentsSharp Electrionic Components

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

GP1U     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search